ITA 23 ITATOOLS Strapping Machine With 18V Battery

ITA 23 ITATOOLS strapping machine with 18V battery – 5,000N tightening force, 16–19mm PET

The ITA 23 strapping machine is a battery-operated handheld plastic strapping machine of the Italian brand ITATOOLS – specializing in the use of 16mm and 19mm wide PET straps. The device has an adjustable tension from 1,900–5,000 N, suitable for applications of strapping heavy pallets, wooden bales, building materials, metal products and industrial goods.

The ITA 23 is equipped with an 18V – 5Ah Li-ion battery, a digital control panel and a bug-free friction welding mechanism. The machine uses Manual operation mode, which allows the operator to actively control the wire tightening and welding process.

PACKAGING SOLUTIONS CO., LTD. T-PACKprovides battery strapping machine solutions, PETstraps, components and industrial strapping machine repair services.

Hotline for technical advice and quotation: 0326 416 666

1. Introduction of ITA 23 strapping machine ITATOOLS

The ITA 23 is a series of battery-powered strapping machines designed for applications where high tension forces are required and use PET belts with high bearing capacity.

The device integrates three functions in the same machine:

• Tighten the straps: stretch the PET straps around the package according to the set tension.

• Friction welding: bonding the two ends of the plastic wire without the use of iron bugs.

• Cut the wire: remove the excess wire to complete the strapping cycle.

Thanks to the battery-powered design, the machine can be operated in many locations in the factory or warehouse without the need to connect a compressed air system.

The ITA 23 is particularly suitable for businesses that use 16mm or 19mm PET wires and require greater tension than light-duty strapping machines.

Outstanding advantages of the ITA 23

• Adjustable tension from 1,900–5,000 N.

• Use 16mm and 19mm PET straps.

• Li-ion battery 18V – 5Ah.

• Manual Operation Mode.

• Digital control panel.

• Friction welding does not require metal belt locks.

• Wire gauge conversion does not require changing the guide.

• The design supports one-handed operation.

• The engine protection cover is sturdy, suitable for industrial environments.

• Convenient to use at multiple packaging locations.

2. ITA 23 strapping machine specifications

Note: A tension of 5,000 N is equivalent to approximately 510 kgf. This is the rope tension generated by the machine, not the maximum weight of the package.

3. Outstanding features of the ITA 23 strapping machine

3.1. Strong tightening force up to 5,000 N

The ITA 23 strapping machine has an adjustable tension from 1,900 N to 5,000 N, meeting a wide range of industrial strapping applications that require large tightening forces.

For heavy pallets, the right tension helps the PET tightly hug the package, supporting the fixation of the product during storage and transportation.

When using the machine, it is necessary to select the tension based on the tensile strength of the wire, the characteristics of the package, and the packaging requirements.

Maximum tension should not be used for all types of products.

3.2. Li-ion battery 18V – 5Ah

The ITA 23 uses an 18Ah 5V Li-ion battery, which allows the device to operate independently without connecting wires or compressed air during strapping.

The battery-powered design is convenient for strapping at multiple locations in the factory, especially for large or hard-to-move pallets.

For businesses with high strapping output, it is possible to consider equipping a backup battery to reduce downtime.

3.3. Manual operation mode

The ITA 23 uses the Manual Operating Mode.

The operator actively performs the tightening and welding operation of the wire according to the sequence of operation of the machine.

This is an important difference between the ITA 23 and the ITATOOLS series, which have three modes of Automatic, Semi-Automatic, and Manual.

3.4. Digital Control Panel

The machine is equipped with a Digital Control Panel, which supports setting operating parameters.

Users can adjust the tension to suit each type of rope and package, helping to limit overtightening or insufficient force.

3.5. Wire gauge conversion without changing the guide

The ITA 23 supports the use of 16mm and 19mm PET wires without changing the guide when switching wire gauges.

This feature is convenient for businesses with many product groups using different wire specifications.

3.6. Friction welding without iron bugs

The machine uses Friction Weld Sealing technology to bond the two ends of the wire PET.

The welding process generates heat through the frictional movement between two layers of wire, forming a joint without the use of metal belt locks.

The quality of the weld depends on the wire quality, welding parameters, and the condition of the welding mechanism.

4. What PET wire does the ITA 23 strapping machine use?

The ITA 23 is designed to use a 16mm or 19mm wide PET wire.

16mm PET Strap

The machine supports a 16mm PET wire with a thickness of 1.05 mm.

The 16mm PET wire is used in a variety of industrial pallet and bale strapping applications.

When selecting a wire, it is necessary to check the actual thickness, tensile strength and quality of the wire surface.

19mm PET straps

The ITA 23 strapping machine uses a 19mm PET rope suitable for a wide range of cargo strapping applications that require high tension.

A suitable 19mm PET wire thickness is 0.8–1.27 mm.

19mm PET wire is commonly used for fixing brick pallets, wooden bales, building materials and industrial products.

For packages with sharp edges, it is necessary to use corner protection materials and evaluate the bearing capacity of the wire.

T-PACK support consultation on the selection of 16mm and 19mm PET wires suitable for the ITA 23 strapping machine.

5. Application of ITA 23 strapping machine in industry

Brick and building materials industry

ITA 23 is suitable for strapping applications of brick pallets, bale materials and construction products with high tension requirements.

Wood and pallet manufacturing

The machine is used for strapping wooden bales, plywood, wooden pallets and bundle wood products.

Mechanical and metallurgical industry

ITA 23 can be used to fix bales of mechanical components, metal workpieces and industrial products when the packaging conditions are suitable for PETwires.

Steel industry

The machine can be used for strapping applications of steel products that have been baled in accordance with PETwire.

For products with sharp edges, high temperatures, or special safety requirements, it is necessary to evaluate the usability of PET wires before selecting the machine.

Logistics and logistics

The ITA 23 supports strapping heavy pallets at multiple locations in the warehouse without the use of a fixed pneumatic system.

6. ITA 23 Strapping Machine Instruction Manual

The basic strapping process includes:

Step 1: Check the battery, machine condition and pulling, welding, cutting mechanism.

Step 2: Choose the right 16mm or 19mm PET wire.

Step 3: Wrap the cord around the package and overlap the two ends of the cord according to the instructions.

Step 4: Insert the cord into the guide position of the machine.

Step 5: Set the appropriate tension level.

Step 6: Activate the rope tensioning operation.

Step 7: Perform welding and wire cutting operations according to the operating sequence.

Step 8: Wait for the cycle to be completed, remove the machine and check the quality of the weld.

Safety Notes: Do not put your hands on the pulling wheel or welding mechanism when the machine is operating. Do not use the machine or straps to lift or hang the package.

7. Common Mistakes on ITA 23 Strapping Machine

During operation, the ITA 23 may develop faults related to the pulling mechanism, welding, cutting, battery power or wear components.

The above phenomena need to be physically checked to determine the cause before replacing the component.

8. ITA 23 strapping machine repair service in T-PACK

In addition to supplying equipment, T-PACK undertake inspection, maintenance and repair of ITA 23 strapping machines.

The support items include:

• Check the wire puller is slipping or not reaching tension.

• Check and handle unstable wire soldering.

• Inspect, replace the tension wheel and cutter.

• Check the battery, contacts, and control system.

• Cleaning and maintaining the pulling and welding mechanism.

• Consulting replacement components suitable for the condition of the machine.

Customers can send machine stamp images, fault videos, and phenomenon descriptions to T-PACK initial evaluation support.

ITA Strapping Machine Repair Hotline 23: 0326 416 666

9. ITA 23 strapping machine components and maintenance

Routine maintenance helps maintain the tensile capacity, weld quality, and stability of the equipment.

The parts to be inspected include:

• Stretch cakes.

• Contact surfaces and wire guides.

• Friction welding mechanism.

• Wire cutter.

• Batteries and electrical contacts.

• Control panel.

• Mechanical parts wear out.

Before cleaning or servicing, the machine should be switched off and the battery removed according to the safety instructions.

Do not arbitrarily oil the surface of the drag wheel or friction welding mechanism without technical instructions.

When do ITA 23 components need to be replaced?

If the machine frequently slides the wire, does not reach tension, welds unsteadily, or does not cut the wire even after checking the wire specifications and installation parameters, it is necessary to check the condition of the relevant components.

Component replacement should be based on actual inspection results to avoid incurring unnecessary costs.

10. Comparison of ITA 23, ITA 24 and ITA 25 strapping machines

Should I choose ITA 23, ITA 24 or ITA 25?

Choose ITA 23 when your business needs tension up to 5,000 N, use a 16mm or 19mm PET wire and give priority to manual operation mode.

Choose ITA 24 when you need to use 13–16mm wire, tension to 2,500 N, and three operating modes.

Consider the ITA 25 when you need to use 16–19mm wire, tensions up to 4,500 N, and flexible operating modes.

The selection of the machine needs to be based on the characteristics of the package, wire specifications and actual production conditions.

11. How much does ITA 23 ITATOOLS strapping machine cost?

The price of the ITA 23 strapping machine depends on the machine configuration, number of batteries, chargers, order quantity, and supply policy at the time of purchase.

The product set configurations include:

When requesting a quote, customers should confirm the number of batteries, chargers, and accessories included.

Contact T-PACK to get a quote for ITA strapping machine 23: 0326 416 666.

12. Buy ITA 23 strapping machine in T-PACK

PACKAGING SOLUTIONS CO., LTD. T-PACKprovides industrial packaging machinery and supplies solutions.

Customers can contact for advice on products and services:

• Battery-powered ITATOOLS strapping machine.

• Portable PET plastic strapping machine.

• Straps PET 16mm and 19mm.

• Strapping machine components and accessories.

• Strapping machine inspection, maintenance and repair services.

• Consulting on equipment selection according to production needs.

T-PACK supports equipment selection based on the type of cargo, wire specification, tension and operating conditions.

T-PACK PACKAGING SOLUTIONS CO., LTD

Hotline: 0326 416 666

Website: https://t-pack.vn/

13. FAQs about ITA 23 strapping machine

How much tightening force does the ITA 23 strapping machine have?

The machine has an adjustable tension from 1,900–5,000 N.

How many mm straps does the ITA 23 use?

The machine uses a 16mm or 19mm wide PET wire.

Can ITA 23 use 19mm PET wire?

Yes. The machine supports a 19mm PET wire with a thickness of 0.8–1.27 mm.

What battery does the ITA 23 machine use?

The device uses an 18V – 5Ah Li-ion battery in an 18V configuration.

Does ITA 23 have an automatic mode?

Nope. The ITA 23 uses the Manual operating mode.

Does ITA 23 need iron bugs?

Nope. The machine uses friction welding technology to connect the two ends of the PETwire.

Can ITA 23 be strapped with steel?

Nope. ITA 23 is designed for plastic straps, not steel straps.

Can ITA 23 change between 16mm and 19mm wire?

Yes. The machine supports wire gauge conversion without changing the guide.

What should I do if the ITA 23 machine slips the wire?

The tension gear, wire dust, wire specification and setting tension should be checked. If the fault continues to appear, a technical check should be checked.

Is it possible to repair an ITA 23 strapping machine?

Faults related to the traction mechanism, welding, cutting, battery and control system can be checked and repaired according to the condition of the equipment.

Where to buy ITA 23 strapping machine?

Contact T-PACK – 0326 416 666 for advice on ITA 23 machines, PETbelts, components and repair services.