Joinpack A-88NAB Automatic Strapping Machine

A88NAB JOINPACK Taiwan Automatic Strapping Machine – Servo Motor, 60 Wires/Min

A88NAB Automatic Strapping Machine or JOINPACK A-88NAB is a high-end automatic strapping machine with integrated conveyor, specially designed for industrial packaging lines with high requirements for speed, stability and continuous operation.

The product belongs to the A-8 Series of JOINPACK – Taiwan, which features a direct-drive Servo motor system, an active conveyor countertop, PLC control combined with an HMI touch screen , and the ability to interact with equipment in the production line.

With strapping speeds from 60 wires/min, adjustable tension of 3–70kg depending on the wire size, standard 650 × 500mm wire guide frames, and the ability to use 5mm, 6mm, 9mm, 12mm or 15mm wide plastic straps according to the configuration, the JOINPACK A88NAB strapping machine is suitable for factories that need to optimize packaging productivity.

In particular, the A88NAB is equipped with supporting functions such as automatic wire feeding, missing wire feed detection sensor, end-of-coil wire pushing system, fault loop handler, conveyor speed adjustment and interconnection with input-output equipment.

PACKAGING SOLUTIONS CO., LTD. T-PACKprovides automatic strapping machine solutions, components, plastic straps and industrial strapping machine inspection and repair services.

Hotline for consultation and quotation: 0326 416 666

1. Introduction of A88NAB JOINPACK automatic strapping machine

JOINPACK A88NAB is a series of automatic strapping machines using a servo motor, developed to meet high-speed strapping applications on production lines.

Different from semi-automatic strapping machines or automatic strapping machines without active conveyors, the A88NAB is equipped with a drive conveyor tabletop, which helps transport the package through the strapping position when integrated into the right system.

The machine uses PLC controller and HMI touch screen to manage the operation process, and supports interconnection with the front and rear equipment of the line.

During operation, the system can perform the following stages:

• Receive packages from the incoming conveyor.

• Transport and position the package at the strapping location.

• Feed the straps through the wire guide frame.

• Stretch the cord around the package.

• Heat welding bonds the two ends of the wire.

• Cut the wire and complete the cycle.

• Move the package to the next stage.

Thanks to its high speed and line integration capabilities, the A88NAB automatic strapping machine is the right choice for businesses looking to reduce manual operations and improve packaging productivity.

Outstanding Advantages of A88NAB Automatic Strapping Machine

• High-speed Servo motor.

• Strapping speed from 60 wires per minute.

• Active drive conveyor table top.

• PLC control incorporates HMI touch screen.

• The tension is from 3–70kg depending on the wire size.

• Supports 5mm, 6mm, 9mm, 12mm and 15mm wide straps.

• Standard wire guide frame 650 × 500mm.

• Conveyor speed can be adjusted.

• Built-in automatic wire feeding system.

• There is a sensor that detects the missing wire level.

• There is a coil end wire push system.

• There is a fault loop processor.

• Supports interconnection with input and output devices.

• There is an option of a top press, a different size wire guide frame, and a stainless steel case.

2. Specifications of A88NAB automatic strapping machine

Note: Speeds from 60 wires/min are strapping cycle speed parameters, which does not equate to 60 cartons/minute productivity under all conditions. Wire gauges, frame sizes, and power supply should be confirmed according to the actual machine configuration.

3. Outstanding features of A88NAB automatic strapping machine

3.1. Servo motor – High strapping speed

The most prominent feature of the A88NAB automatic strapping machine is the Servo motor system.

Compared with conventional AC motors, the Servo system allows for flexible motion control, meeting the requirements of speed and accuracy during strapping.

Thanks to this drive system, the A88NAB achieves strapping speeds of 60 wires per minute, which is suitable for high-volume lines.

The advantages of Servo motors include:

• Support high-speed operation.

• Precise motion control.

• Suitable for continuous repeated strapping cycles.

• Convenient coordination with PLCcontrol system.

• Meet the automation requirements in the packaging line.

This is an important feature that distinguishes the A88NAB from automatic strapping machines that use AC motors.

3.2. Strapping speed from 60 wires/min

The JOINPACK A88NAB has strapping speeds from 60 wires per minute according to the model's specifications.

This speed is suitable for applications that require fast strapping and continuous operation.

However, the actual yield also depends on:

• Package size and weight.

• Number of straps per piece.

• Conveyor speed.

• Distance between packages.

• Package positioning time.

• PLCcontrol program.

• Ability to synchronize with input and output devices.

When choosing a machine, businesses should evaluate the productivity of the entire line instead of relying only on the maximum strapping speed.

3.3. Active drive conveyor table top

The A88NAB JOINPACK automatic strapping machine is equipped with a drive conveyor countertop.

This system helps transport the package through the strapping position and supports connection to other equipment in the line.

Compared with the automatic strapping machine without active conveyor, this design offers the following benefits:

• Reduce manual loading and unloading.

• Conveniently connected to the inlet and outlet conveyors.

• Support continuous operation.

• Help organize the packaging process synchronously.

• The transportation speed can be adjusted according to production needs.

This is a special feature that is suitable for factories that are building or upgrading automatic packaging lines.

3.4. Control PLC HMI touch screen combination

The A88NAB is equipped with a PLC controller and an HMI touch screen.

PLC is in charge of signal processing and controlling the machine's operation sequence.

HMI displays help the operator interact with the control system through an intuitive interface.

The benefits of the PLC – HMI system include:

• Conveniently monitor the operating status.

• Support machine control operation.

• Facilitate the testing of the installation parameters.

• Convenient signal testing and fault diagnosis.

• Suitable for line integration applications.

The specific display functions and settings depend on the control program equipped on the machine.

3.5. Support interconnection with front and rear equipment

The JOINPACK A88NAB is equipped with Upstream and Downstream Interlock functions.

This function allows for coordination of operations with equipment located in front and back of the machine in the packaging line.

Devices that may need to be connected include:

• Feed conveyor.

• The conveyor belt goes out to the goods.

• Carton sealing machine.

• Product Classification System.

• Related automatic packaging equipment.

When integrating the line, technicians need to check the connection diagram, control signals and safety requirements to ensure that the equipment works synchronously.

3.6. Adjusting the Conveyor Speed

The machine allows the adjustment of the conveyor speed, helping businesses set the transportation speed in accordance with the production rhythm.

This feature is especially useful when the A88NAB is integrated with other packaging devices.

The speed adjustment needs to ensure that the package is put in the right position and stable during the strapping process.

3.7. Tension from 3–70kg depending on the wire size

JOINPACK A88NAB supports two tension bands according to the wire specification:

For 5mm and 6mm wires: tension between 3–30kg.

For 9mm, 12mm and 15mm wires: tension between 5–70kg.

The ability to use low tension is suitable for lightweight or easily deformed packages.

The higher tension range is suitable for applications where the bale needs to be secured more firmly, within the allowable limits of the machine and belt.

It should be noted that the maximum tension is not the same for all wire gauges. Businesses should choose the configuration according to the type of wire and the actual packaging requirements.

3.8. Support 5–15mm plastic straps

The machine can be configured to use wire gauges:

• 5mm straps.

• 6mm straps.

• 9mm straps.

• 12mm straps.

• 15mm straps.

The ability to support multiple wire gauges helps the A88NAB meet a wide variety of packaging applications.

However, it is necessary to confirm the wire gauge when ordering. It is not recommended to default to a machine that can convert all wire gauges without adjusting or replacing the guide unit.

3.9. Looping Ejector

The A88NAB is equipped with a standard Looping Ejector function.

This system supports the handling of the loop in situations where strapping errors arise.

The function helps reduce manual wire handling and supports limiting interruption time when the machine encounters problems related to wire looping.

3.10. Short Feeding Sensor

The machine is equipped with a Short Feeding Sensor, which helps detect the condition that the belt is not sufficiently fed as required.

During the automatic strapping process, if the wire does not fully discharge the frame, the machine may not be able to perform the next cycle.

The lack of wire feed sensor supports the system to recognize abnormal conditions for processing according to the control program.

3.11. Coil End Eject System

The A88NAB is equipped with a Coil End Eject System, which supports the processing of the remaining wire when the winding ends.

This feature reduces the handling of coiled end wires during material changes.

For high-frequency use lines, the convenient handling of coiled end wires reduces the preparation time between wire changes.

3.12. Waist Auto Loading System

JOINPACK equips the A88NAB with the Waist Auto Loading System as standard.

This system supports the process of feeding wires into the machine, which reduces manual wire feeding.

This is a feature that is suitable for businesses that need to operate the machine continuously and want to reduce the preparation time when changing coils.

3.13. 650 × 500mm standard wire conductor frame

The A88NAB uses a standard 650 × 500mm wire conductor frame.

The wire guide frame is responsible for guiding the wire around the package during strapping.

In addition to the standard sizes, JOINPACK offers the option of different frame sizes.

When choosing a wire frame, businesses need to determine:

• The largest width of the package.

• The maximum height of the package.

• The required clearance between the package and the frame.

• The method of putting goods in and out.

• Position the straps on the package.

4. Upgrade options on the A88NAB strapping machine

In addition to the standard functions, JOINPACK offers several options for the A88NAB.

4.1. Top Press

The Top Press – P option adds a pressing mechanism above the package.

The press can assist in holding or stabilizing the bale during strapping, depending on the equipment configuration.

This option is suitable for consideration for products that need to be fixed in place when strapping.

4.2. Other size wire conductor frames

JOINPACK offers the option of a wire conductor frame with a size other than standard.

Businesses can choose a configuration based on package size and belt layout requirements.

4.3. Stainless steel case

The A88NAB has a Stainless Steel Housing option.

The stainless steel case version is suitable for consideration in environments with unique requirements for case materials.

The selection should be based on the actual sanitary conditions, humidity and production environment.

5. Application of A88NAB automatic strapping machine in industry

Carton Production Line

A88NAB is suitable for conveyor carton strapping systems where products are transported continuously between stages.

Food & Beverage Industry

The machine can be used for strapping containers of food, beverages and products that have been packaged.

Electronics & Components Industry

The A88NAB is suitable for applications strapping electronic components, spare parts and industrial products.

Apparel and footwear industry

The machine supports strapping garments, shoes and outbound packages.

Printing and Paper Industry

The A88NAB can be used for strapping paper bales, printing products, and bundle packages when configured appropriately.

Logistics and logistics industry

The equipment is suitable for packaging, sorting and transporting cartons that require synchronization between conveyors.

6. A88NAB Automatic Strapping Machine Instruction Manual

The basic operation process includes:

Step 1: Check the power supply, belts, and safety conditions before operating.

Step 2: Fit the belt coil correctly.

Step 3: Feed the wire using the wire feeding system according to the machine's instructions.

Step 4: Check the settings on the HMI screen.

Step 5: Adjust the conveyor speed in accordance with the line span.

Step 6: Check the interlock signal with the input and output devices.

Step 7: Put the package into the strapping area using the conveyor system.

Step 8: The machine performs the strapping cycle according to the control program.

Step 9: Check the quality of the weld and the condition of the bale after strapping.

Step 10: Monitor the machine status and handle the alarms according to the technical instructions.

Safety Notes: Do not put your hands in the area of the conveyor, wire guide frame, tension mechanism, cutter, or heating bar while the machine is operating. Disconnect and isolate the power source before servicing.

7. Common mistakes on the A88NAB automatic strapping machine

During use, the machine may develop faults related to the wire feeding, tensioning, heat sealing, conveyor or control systems.

The above phenomena are only the initial inspection orientation. A physical check is required to determine the cause before replacing the component.

8. A88NAB automatic strapping machine repair service in T-PACK

In addition to supplying equipment, T-PACK to inspect, maintain and repair the A88NAB JOINPACK automatic strapping machine.

The support items include:

• Check for error that the machine does not release the wire or the launch cord does not reach the full frame.

• Check for machine failure to stretch the wire.

• Check the heat welding mechanism and cutters.

• Servo motor and drive system test.

• Check the conveyor system.

• Check the PLC controller and HMI monitor.

• Check the missing wire level sensor.

• Check the wire feeding system and push the end of the coil.

• Check the interconnection signal with the equipment in the line.

• Cleaning and maintenance of mechanical systems.

• Consulting replacement parts according to actual conditions.

Customers can send machine stamp images, fault videos, HMI screenshots, and phenomenon descriptions to T-PACK initial evaluation support.

Hotline for repair of A88NAB automatic strapping machine: 0326 416 666

9. A88NAB strapping machine components and periodic maintenance

Parts to be inspected and maintained include:

• Heating bar.

• Wire cutter.

• Wire pressing and retaining unit.

• Wire feed roller.

• Tension mechanism.

• Servo motor.

• Conveyor belts and drive elements.

• The wire level sensor is missing.

• Automatic wire feeding system.

• Coil end wire push system.

• PLC and HMI displays.

• Sensors, switches, and control parts.

• Mechanical parts wear out.

When do I need to replace A88NAB components?

If the machine frequently fails to feed the wire, does not stretch, welds unsteadily, the conveyor works abnormally or is out of sync with the line, the relevant parts should be checked.

Component replacement needs to be based on actual diagnostic results to avoid incurring unnecessary costs.

Machine Maintenance Instructions

• Clean the belt dust in the wire feeding area.

• Check the wire path and pulling rollers.

• Check the heating rod and weld quality.

• Check the cutter and pressing mechanism.

• Check the conveyor belt and drive system.

• Check the sensor, wires, and connectors.

• Monitor the activity status on the HMI.

• Disconnect the power supply before performing maintenance.

Routine maintenance helps to detect wear and tear early and limit production line downtime.

10. Comparison of A88NAB and A85NAB automatic strapping machines

Should I choose A88NAB or A85NAB?

Choose the A88NAB automatic strapping machine when your business needs high strapping speeds, use Servo systems, and prioritize the ability to operate on high-volume lines.

Choose the A85NAB automatic strapping machine when you need a strapping machine with integrated conveyor, PLC control – HMI but does not require high speed like the A88NAB.

In addition to speed, businesses need to consider the size of the package, the number of straps per package, the ability to synchronize with the line, and the cost of investment.

11. How much does the A88NAB JOINPACK automatic strapping machine cost?

The price of the A88NAB automatic strapping machine depends on the wire guide frame size, power supply configuration, belt gauge, conveyor system, and upgrade options.

When requesting a quote, customers should provide:

• Model JOINPACK A-88NAB.

• Package size and weight.

• Strap specifications.

• Number of straps per piece.

• Packing productivity required.

• The conveyor speed of the current line.

• The power supply is used at the factory.

• The need to connect PLC or front-to-back equipment.

• Requires a top press or special frame size.

T-PACK support consulting on machine configuration selection based on actual packaging needs.

Contact T-PACK to get a quote for A88NAB automatic strapping machine: 0326 416 666.

12. Buy A88NAB automatic strapping machine in T-PACK

PACKAGING SOLUTIONS CO., LTD. T-PACKprovides industrial packaging machinery and supplies solutions.

Customers can contact for advice on products and services:

• JOINPACK automatic strapping machine.

• Strapping machine integrates conveyor.

• Industrial carton strapping machine.

• Plastic straps and packaging supplies.

• Strapping machine components and accessories.

• Strapping machine inspection, maintenance and repair services.

• Consulting on equipment selection according to production needs.

T-PACK supports machine configuration selection based on bale size, required productivity, wire specification and line integration conditions.

T-PACK PACKAGING SOLUTIONS CO., LTD

Hotline: 0326 416 666

Website: https://t-pack.vn/

13. FAQs about A88NAB automatic strapping machine

Which brand is the A88NAB automatic strapping machine?

A88NAB is a product of JOINPACK, a packaging equipment brand from Taiwan.

What is the strapping speed of the A88NAB machine?

The machine has a strapping speed from 60 wires per minute according to the manufacturer's specifications.

What engine does the A88NAB use?

The machine adopts Servo motor.

Does the A88NAB machine have a conveyor?

Yes. The machine is equipped with a drive conveyor tabletop, which is suitable for line integration.

Does the A88NAB machine have PLC control?

Yes. The device uses PLC combined with an HMI touch screen.

How many mm of belt does the A88NAB use?

The machine supports 5mm, 6mm, 9mm, 12mm or 15mm wide belts according to the configuration.

How much tightening force does the A88NAB have?

The tension is between 3–30kg for 5–6mm wire and 5–70kg for 9–15mm wire.

Can the A88NAB machine adjust the conveyor speed?

Yes. The function of adjusting the conveyor speed is standard equipment.

Can the A88NAB be connected to the line?

Yes. The machine supports interconnection with input and output devices.

Does the A88NAB machine have an automatic wire feeding function?

Yes. The machine is equipped with Waist Auto Loading System.

Does the A88NAB have a sensor that detects the missing wire level?

Yes. The machine is equipped with a Short Feeding Sensor.

Does the A88NAB machine have a top press?

Top Press – P is optional, need to be confirmed when ordering.

Can the A88NAB use 220V electricity?

Yes. The machine has a single-phase or three-phase 220V power supply configuration. It is necessary to confirm the correct configuration and check the voltage stamp of the machine.

What should I do if the A88NAB does not discharge wires?

The wire feeder, wire path, missing wire feed sensor and control system need to be checked.

What should I do if the A88NAB machine does not run on the conveyor belt?

It is recommended to check the drive motor, speed controller, and interlock signal.

What should I do if the A88NAB machine does not receive signals from the line?

It is necessary to check the electrical connection, input-output interlock signal and PLCprogram.

Is it possible to repair the A88NAB automatic strapping machine?

Faults related to wire feeding, stretching, welding, cutting, conveyor and control systems can be checked and repaired according to the actual condition.

Where to buy the A88NAB automatic strapping machine?

Contact T-PACK – 0326 416 666 for advice on A88NAB automatic strapping machine, components and repair services.