T-PACKDetailed ES-103 Strapping Machine Instruction Manual from A-Z
The correct strapping machine manual is an important factor in helping the equipment operate stably, increase its service life, and ensure a strong weld. Especially with the ES-103 semi-automatic strapping machine, proper operation will help reduce errors and increase packaging productivity.
The ES-103 semi-automatic strapping machine is ideal equipment in the packaging industry thanks to its compact design, simple operation and high stability. This article will help bosses and technicians understand how to use technical strapping machines .
1. ES-103 strapping machine specifications
Before operating the strapping machine, it is necessary to know the important parameters:
- Strapping speed: About 2s/belt.
- Belt tension: 150-450 N (15-45kg).
- Strap type: 9mm, 12mm, 15.5mm.
- Power supply: 110V/60Hz or 230V/50Hz.
2. The process of using ES-103 strapping machine is technically correct
To ensure the efficiency of using the strapping machine, you should ask your staff to follow the following process:
Step 1: Prepare the strapping machine
- Connect the plug to a suitable power source.
- Turn the power switch (Main switch) to the "1" position.
- Thread the belt through the guide system and brake arm.
Step 2: How to strp the package with a strapping machine
- Place the package on the strapping machine tabletop.
- Wrap the straps around the package and insert the end of the strap into the receiving slot.
- The strapping machine will automatically: Tightening → Heat Welding → Wire Cutting → Wire Release.
3. Periodic strapping machine maintenance instructions
Periodic maintenance of the ES-103 strapping machine helps the machine to operate stably and reduce errors during the use of the strapping machine:
- Weekly: Cleaning the machine, dusting the welding unit, oiling the moving parts.
- Annually: Change the transmission oil (~150ml).
- Note: Always unplug power before maintenance.
4. Common mistakes when using strapping machines and how to handle them
Here are common mistakes when using strapping machines:
- Strapping machine without wire discharge: Check the coil and roller.
- Non-stick welding strapping machine: Readjust the welding rod temperature.
- Strapping machine jammed wire: Remove and clean the wire guide assembly.
Safety Warning: Do not touch the welder when using the strapping machine as the temperature may exceed 280°C.
👉 See also: Genuine ES-103 Semi-Automatic Strapping Machine
Genuine Joinpack Strapping Machine
Learn about strapping technology
T-PACK – Professional Packaging Solutions
Hotline: 0326 416 666
Website: https://t-pack.vn
