Orgapack OR-T 260 Strapping Machine

OR-T 260 ORGAPACK Battery Strapping Machine – Specs, Price and Instruction Manual

The OR-T 260 ORGAPACK strapping machine (ORT 260) is an 18V battery-powered handheld plastic strapping machine, specializing in the use of PET and PP straps in industrial packaging. The device has a maximum tension of 2,500 N, supports 12–13 mm and 15–16 mm wide wires, and integrates tensioning, friction welding and wire cutting functions on the same machine.

With three operating modes: Automatic, Semi-Automatic and Manual, the OR-T 260 is suitable for manufacturing plants, logistics, wood industry, building materials, mechanics and businesses that regularly strapped pallets.

PACKAGING SOLUTIONS CO., LTD. T-PACKprovides ORGAPACK battery strapping machine solutions, PET/PPstrapping, components and technical services for industrial strapping equipment.

Contact for advice and quotation: 0326 416 666.

1. Overview of the ORGAPACK OR-T 260 strapping machine

ORGAPACK is a Swiss brand of industrial strapping equipment, known for its line of battery-powered handheld strapping machines and specialized packaging equipment.

The OR-T 260 is a battery-powered plastic strapping machine, designed to replace manual strapping operations that use separate strapping tools, pliers and belt locks.

The device integrates three main functions:

• Tighten the belt: adjust the tension in accordance with the package.

• Friction welding: bonding the two ends of the wire PET or PP without the need for bugs.

• Wire cutting: remove the excess wire after the welding process is completed.

The handheld design makes it easy for the operator to move to the strapping position, especially suitable for large pallets or packages that are difficult to put into the stationary strapping machine.

Outstanding advantages of the OR-T 260

• Standard tension from 900 to 2,500 N.

• There is a low tension mode for suitable applications.

• Use 12–13 mm or 15–16 mm wide PET and PP wires.

• Friction welding does not require metal belt locks.

• Three modes of automatic, semi-automatic and manual operation.

• Uses 18V Bosch Li-ion batteries.

• No air compressor or steam wiring is required.

• Suitable for a wide range of industrial pallet strapping applications.

2. OR-T 260 strapping machine specifications

Note: The maximum tension of 2,500 N is equivalent to approximately 255 kgf. This is the rope tension, not the maximum load of the package.

3. What are the features of the OR-T 260 strapping machine?

3.1. Maximum tightening force 2,500 N

The ORGAPACK OR-T 260 has a standard tension range of 900–2,500 N, which allows the user to adjust the tightening force according to the characteristics of the belt and package.

For packages that need to limit deformation, the operator can use the appropriate tension level instead of always setting the maximum tension.

For heavy packages, the selection of the tightening force must be carried out simultaneously with the evaluation of the bearing capacity of the PETrope, the number of belt loops and the transport conditions.

3.2. Three flexible operation modes

Automatic: suitable for repetitive strapping tasks, simplifying operation according to the operating program.

Semi-Automatic: allows the operator to be more active during the tightening process and complete the strapping cycle.

Manual: suitable when it is necessary to control operations according to the manual mode of the device.

The choice of operation mode depends on the type of cargo, the required tension and the experience of using the machine.

3.3. Ironbug-free friction welding technology

The OR-T 260 uses Friction Welding technology to bond two layers of plastic wire.

During the welding process, the frictional movement generates heat at the contact area between the two layers of wire, which helps to form the joint after the cycle is completed.

The advantage of this method is that there is no need to use metal belt buckles, reducing the number of supplies and tools during the packaging process.

The quality of the weld depends on the type of wire, the wire surface, the welding time, and the condition of the welding mechanism of the machine.

3.4. Use of Bosch Li-ion 18V batteries

The OR-T 260 strapping machine uses an 18V Bosch Li-ion battery system, which allows operation without the need for wire or pneumatic connection during strapping.

This is convenient for factories with multiple palletizing locations, large-area warehouses, or packages that are difficult to move.

The battery capacity, charging time, and number of strapping cycles depend on the battery configuration and operating conditions.

4. What PET and PP belts does the OR-T 260 use?

The ORGAPACK OR-T 260 is designed for PET and PP plastic straps that are sized to suit the equipment configuration.

12mm and 16mm PET straps

PET rope has a relatively high tensile strength and is commonly used in the packaging of pallets, bales, building materials, and industrial products.

The OR-T 260 supports wire width groups of 12–13 mm and 15–16 mm.

When selecting a PET wire for the machine, it is necessary to check the width, thickness, tensile strength and weldability of the wire at the same time.

PP Straps

PP wires are commonly used for light and medium packages, cartons, and some industrial packaging applications.

With PPropes, it is necessary to select the right tension level to avoid breaking the rope or deforming the bale.

T-PACK support consulting on the selection of PET/PP belts suitable for the OR-T 260 machine and actual packaging needs.

5. Application of OR-T 260 strapping machine in industry

Wood and furniture industry

OR-T 260 can be used for strapping wooden bales, plywood, wooden pallets, and baled furniture products.

Building Materials Industry

The machine is suitable for construction material pallet strapping applications where tension requirements are within the technical scope of the equipment.

For products with sharp edges, it is necessary to use corner protection and choose the right straps.

Mechanical Engineering

The machine is used to secure bales of mechanical components, spare parts and industrial goods when packaging conditions allow the use of PET/PPplastic wires.

Logistics and logistics

The battery-powered design allows the operator to move between packing positions and perform strapping directly on the pallet.

Paper and packaging industry

The OR-T 260 can be used for strapping bales, cartons and bundle products with suitable tension requirements.

6. Comparison of OR-T 260 and OR-T 270 strapping machines

The ORGAPACK OR-T 260 and OR-T 270 are both battery-powered plastic strapping machines, with a maximum tension of 2,500 N according to the specifications presented in the product documentation.

The comparison table is for reference. It is necessary to verify the actual battery configuration, accessories and machine version before selection.

Should I choose OR-T 260 or OR-T 270?

If the business is using the OR-T 260 and the equipment still meets the needs of strapping, it is possible to continue to operate the machine in combination with periodic maintenance and component replacement when needed.

For businesses investing in new equipment, the OR-T 270 is a worthy choice when it comes to higher-capacity battery configurations.

However, the machine selection should be based on the type of PET/PPwire, tension, packaging output, and actual investment budget.

7. Manual Strapping Machine OR-T 260

The basic strapping process includes:

Step 1: Check the machine, battery and the condition of the pulling, welding, and cutting mechanism.

Step 2: Choose the right size PET or PP wire.

Step 3: Wrap the cord around the package and overlap the two ends of the cord according to the instructions.

Step 4: Insert the wire into the machine according to the guide position.

Step 5: Set the appropriate tension and welding time.

Step 6: Activate the wire stretching and soldering cycle.

Step 7: Wait for the machine to complete the welding process, cut the wire and remove the machine properly.

Step 8: Check the weld and stability of the package.

Safety Notes: Do not put your hands on the pulling or welding mechanism area when the machine is operating. Do not use the machine to lift or hang the package.

8. Common faults on the OR-T 260 strapping machine

During use, the machine may have errors due to wear and tear components, inappropriate wire quality or installation parameters.

The above contents are the direction of the initial inspection. The determination of the exact cause should be based on the actual inspection.

Repair of strapping machine OR-T 260

For machines that have been used for a long time, periodic inspection of the pulling mechanism, tension wheel, cutter, welding element, and battery is necessary to maintain strapping performance.

T-PACK provides technical consulting and repair services for industrial strapping machines, assisting customers to determine the condition of the equipment and appropriate remedial plans.

Customers can send pictures or videos of the error phenomenon for initial inspection advice.

Technical support hotline: 0326 416 666.

9. OR-T 260 Machine Maintenance Guide

Routine maintenance helps to limit wire slippage, unstable welds, and abnormal wear and tear.

Items to check include:

• Clean the wire dust at the tension gear area.

• Check the trailer for wear.

• Cleaning the friction welding mechanism.

• Check the wire cutter.

• Check the wire path and contact details.

• Check the status of the battery and electrical contacts.

• Check the mechanical parts according to the technical documentation.

Before servicing, it is necessary to switch off the machine and remove the battery according to the safety instructions.

Do not arbitrarily apply oil or lubricant to tensile surfaces and friction welding if not required by the manufacturer.

10. How much does the OR-T 260 ORGAPACK strapping machine cost?

The price of the OR-T 260 strapping machine depends on product condition, battery configuration, charger, included accessories, and availability at the time of ordering.

For businesses using the OR-T 260, in addition to the option of buying a new machine, it is possible to consider repairing or replacing worn components if the equipment is still capable of effective exploitation.

When contacting T-PACK, customers should provide the model, needs, type of wires and the number of equipment to be purchased for advice on the right plan.

Contact T-PACK for advice and to get a quote: 0326 416 666.

11. Buy OR-T 260 strapping machine and components at T-PACK

PACKAGING SOLUTIONS CO., LTD. T-PACKoperates in the field of supplying machinery, supplies and industrial packaging solutions.

Product and service groups that customers can contact for advice include:

• Battery-powered portable plastic strapping machine.

• ORGAPACK strapping machine and equivalent models.

• PET and PPplastic straps.

• Strapping machine components and accessories.

• Inspection, maintenance and repair of industrial strapping machines.

T-PACK consult based on bale characteristics, rope specifications, tension and operating conditions to assist customers in choosing the right option.

Contact information T-PACK

T-PACK PACKAGING SOLUTIONS CO., LTD

Hotline: 0326 416 666

Website: https://t-pack.vn/

Customers who need a quote for the OR-T 260 machine, advice on upgrading to OR-T 270 or repairing the ORGAPACK strapping machine can contact T-PACK for support.

12. FAQs about OR-T 260 strapping machine

How many mm of belt does the OR-T 260 use?

The machine supports PET/PP wires in widths of 12–13 mm and 15–16 mm according to the technical configuration outlined in the product documentation.

What is the maximum tightening force of the OR-T 260?

The machine has a maximum standard tension of 2,500 N, which is equivalent to about 255 kgf.

Does the OR-T 260 machine need a bug?

Nope. The machine uses friction welding technology to bond two layers of plastic wire.

Does the OR-T 260 need to use an air compressor?

Nope. This is a battery-powered strapping machine, which does not require a pneumatic system during operation.

Can the OR-T 260 use 16mm PET wire?

Yes, when the wire meets the requirements for width, thickness and quality in accordance with the machine configuration.

What is the difference between OR-T 260 and OR-T 270?

The two models have a similar tension range according to the reference. The OR-T 270 belongs to the newer generation and has a larger capacity reference battery configuration.

What should I do if the OR-T 260 slips the wire?

It is necessary to check the wire dust, the condition of the tension gear, the contact surface, and the specifications of the wire in use. If the phenomenon continues to occur, it is recommended to check the technique before replacing the component.

Is it possible to repair the OR-T 260?

Many defects related to the traction mechanism, welding, cutting, or battery can be checked to assess the possibility of repair. The specific option depends on the condition of the equipment and replacement components.

Where to buy the OR-T 260 strapping machine?

Customers can contact T-PACK via hotline 0326 416 666 for advice on OR-T 260, alternative models and suitable strapping solutions.